7.62×35mm

7.62×35mm / .300 AAC Blackout

The 300 AAC Blackout plastic tipped, left, compared to 300 AAC BLACKOUT 125 match, 300 AAC BLACKOUT 220 subsonic, 5.56mm, and 7.62×39mm.
Type Rifle
Place of origin United States
Specifications
Parent case 221 Fireball/.223 Rem
Case type Rimless, Bottleneck
Bullet diameter 0.308 in (7.8 mm)
Neck diameter 0.334 in (8.5 mm)
Case length 1.368 in (34.7 mm)
Overall length 2.26 max SAAMI
Rifling twist 1:8
Primer type Small rifle
Maximum pressure 55,000 psi (380 MPa)
Ballistic performance
Bullet weight/type Velocity Energy
125 gr (8.1 g) OTM 2,215 ft/s (675 m/s) 1,360 ft·lbf (1,840 J)
220 gr (14 g) OTM 1,010 ft/s (310 m/s) 498 ft·lbf (675 J)
Test barrel length: 16 in
Source(s): Official website

7.62×35mm or .300 AAC Blackout, SAAMI short name "300 BLK" is a rifle cartridge developed in the United States and originally chambered in the M4 rifle.

Contents

History

Since its inception as the standard US military primary issue rifle ammunition the 5.56×45mm NATO round has run up against firm opposition from those who argue that the 30 caliber round provides the minimum, if not ideal, performance necessary for the modern battlefield soldier. While 5.56mm NATO has enjoyed widespread acceptance in military circles, the fluid nature of the missions that some special operations groups encounter often demand a round that not only provides better performance[1] in the high energy standard velocity rounds but also one that can offer subsonic performance greater than the current standard 9mm submachine guns now in use.[2]

In an effort to satisfy this need the 300 AAC Blackout (whose existence was first made public by an article in Military Times.)[3] was created by Advanced Armament Corp. in cooperation with Remington Defense, under the direction of AAC's Research and Development Director Robert Silvers.

Project goals were:

Meeting these goals allowed the development team to negate many of the perceived drawbacks inherent to other large caliber cartridges when used in the M4 platform. Colt Firearms and other arms makers had previously chambered AR pattern rifles and carbines in various 30 caliber rounds but several issues were encountered. In the case of the 7.62×39mm, its relatively severe case angle caused feeding issues[4] unless specially modified AK47 magazines were used and even then results were less than outstanding. Modified bolts were also needed owing to its larger case head diameter. Rounds such as the 6.8spc and 6.5 Grendel had similar part-interchangeability issues but did allow for the use of the standard M4/M16 30 round magazine albeit with a reduced capacity.

Wildcats such as the 300 Whisper and 300-221 addressed these issues but their widespread use in single shot handguns along with the lack of an industry standard cartridge dimension meant that a great number of the popular loads on both the supersonic and subsonic end of the spectrum were less than ideal in the AR pattern weapons. Many of these rounds required an excessively long overall cartridge length that would prohibit feeding in a STANAG magazine while using powder charges that were not compatible with the pressure requirements of the M4 carbine. This was particularly noticeable when using subsonic ammunition in conjunction with a silencer as short stroking and excessive fouling would occur similar to that which was seen in the earliest variants of the M16 in Vietnam.[5]

By keeping the M4 in mind as the primary host during load development the designers were able to work up a host of cartridges that would satisfy not only the ballistic requirements set forth but also ensure mechanical reliability with the fewest changes to the weapon itself with only a simple barrel change being necessary for a complete conversion.

300 AAC BLACKOUT was approved by SAAMI on January 17, 2011.

Component primed brass was distributed in March 2011.

On October 23rd, 2011, SSG Daniel Horner of the USAMU used 300 AAC Blackout to win his 4th USPSA Multi-Gun National Championship.[6]

Performance

Maximum effective range =

Barrel Cartridge Velocity Energy
9 in (230 mm) barrel 300 AAC Blackout, 115 gr UMC 2,120 ft/s (650 m/s) 1,136 ft·lbf (1,540 J)
16 in (410 mm) barrel 300 AAC Blackout, 115 gr UMC 2,295 ft/s (700 m/s) 1,344 ft·lbf (1,822 J)
9 in (230 mm) barrel 300 AAC Blackout, 125 gr OTM 2,030 ft/s (620 m/s) 1,143 ft·lbf (1,550 J)
16 in (410 mm) barrel 300 AAC Blackout, 125 gr OTM 2,215 ft/s (675 m/s) 1,360 ft·lbf (1,840 J)

Cartridge types

Availability

The following companies are making or have announced 300 AAC BLACKOUT products:

Predecessors

See also

References

external links